Mobile Photo Documentation App
Capture steam turbine component photos on-site with the mobile app and seamlessly integrate them into your report for accurate field documentation.
Mobile AppReport
Steam Turbine Inspection Report Template
Assess the mechanical condition and performance of steam turbines including rotor, blades, and bearings with this detailed inspection report template. Record defects, observations, and performance measurements in an online editor.
Start your steam turbine inspection report
The full inspection cycle — in one service
Take photos of the object in the mobile app, complete the inspection report from the template, and download the finished photo report as Word or PDF.
Inspection report
Complete the document from this template: sections, fields, photo documentation, and signatures.
Photo Report Generator
Use the photo report generator to attach rotor overview photos, blade close-ups, and bearing condition images to your steam turbine inspection report.
Create Photo ReportReport
Document Preview
Review the structure, sections, and fields before proceeding to fill out the document.
Steam Turbine Inspection Report
No.ST-2026-002
1. General Information
The general information about the inspection, including the purpose, scope, and legal basis, is provided below.
| Inspection date | 7/14/2026 | Address | Unit 1, Coal Creek Power Station, 5000 Power Plant Rd, Centralia, WA 98531 |
| Basis for inspection | Bearing inspection during outage |
Expert Kevin Brown , Turbine Engineer
The inspection was conducted in accordance with the applicable regulations and standards.
2. Object of Inspection
The inspected object is a thermal power plant, including its main equipment and auxiliary systems.
| Object name | LP Turbine | Technical condition | not filled in |
The object was identified and its key characteristics are recorded.
3. Turbine Parameters
The main parameters of the thermal power plant were measured and compared with the design values.
| Rated Power | 300 | Speed | 3000 |
| Inlet Steam Pressure | 165 |
The main parameters are within the permissible ranges specified in the design documentation.
4. Inspection Conditions
The operating conditions of the plant, including load, temperature, and pressure, were monitored during the inspection.
Inspection conditions are not selected.
The operating conditions were stable and within the specified limits.
5. Component Findings
For each major component (rotor, blades, bearings, casing), record defects, observations, and supporting photos.
| No. | Damage description | Photos |
|---|---|---|
| 1 | - | not filled in |
6. Overall Assessment
Provide an overall condition rating, summary of findings, and recommended actions.
| Identification was carried out | LP Steam Turbine |
| There are remarks | Bearing clearances within limits. Minor blade erosion observed. Overall condition fair. |
7. Abbreviations and Symbols
List abbreviations and acronyms used in the report for clarity.
Symbols and abbreviations are not selected
8. Inspection Participants
Record the names and roles of all personnel involved in the inspection.
| No. | Full name | Position / status | Comment |
|---|---|---|---|
| 1 | Kevin Brown | Turbine Engineer | Lead inspector |
| 2 | Patricia Lee | Plant Manager | Reviewed findings |
Signatures
Capture signatures of the turbine engineer and plant manager to approve the report.
______________________________
Kevin Brown, Turbine Engineer
______________________________
Kevin Brown
______________________________
Patricia Lee
Report
Purpose and Procedure for Drafting the Document
What Is a Steam Turbine Inspection Report?
A steam turbine inspection report documents the condition of key turbine components such as rotor, blades, bearings, and casing. It includes visual inspection findings, defect identification, and performance measurements like vibration and temperature.
Who Uses This Report?
Turbine engineers, plant managers, mechanical technicians, and maintenance teams use this report during outages to assess turbine health and plan repairs or overhauls.
Key Sections of the Report
The report includes sections for inspection identification, participants, component inspections (rotor, blades, bearings, casing), performance measurements, overall assessment, and signatures.
Outage Inspections
During planned outages, this report is used to document the condition of turbine components after shutdown and cooling, guiding repair decisions.
Bearing Inspections
The report includes a dedicated bearing inspection section for assessing wear, clearance, and temperature, which is critical for turbine reliability.
Blade Condition Monitoring
Blade erosion and cracking are common issues in steam turbines. This report helps track blade condition over time and plan blade repairs or replacements.
Performance Trending
By recording vibration levels, bearing temperatures, and steam conditions, engineers can trend performance and detect early signs of degradation.
- 1
Prepare for Inspection
Ensure the turbine is shut down and cooled. Remove bearing covers and access panels as needed.
- 2
Perform Visual Inspection
Visually inspect rotor, blades, bearings, and casing. Note any defects such as corrosion, cracking, or wear.
- 3
Take Measurements
Measure vibration levels, bearing temperatures, and record steam conditions and turbine speed.
- 4
Complete Report and Sign
Summarize findings, provide overall condition rating, and list recommendations. Obtain signatures from turbine engineer and plant manager.
Photo Report Generator
Use the photo report generator to attach rotor overview photos, blade close-ups, and bearing condition images to your steam turbine inspection report.
Create Photo ReportMobile Photo Documentation App
Capture steam turbine component photos on-site with the mobile app and seamlessly integrate them into your report for accurate field documentation.
Mobile AppDocument Sections
Click a section to jump to it in the sample document.
General Information
The general information about the inspection, including the purpose, scope, and legal basis, is provided below.
Object of Inspection
The inspected object is a thermal power plant, including its main equipment and auxiliary systems.
Turbine Parameters
The main parameters of the thermal power plant were measured and compared with the design values.
Inspection Conditions
The operating conditions of the plant, including load, temperature, and pressure, were monitored during the inspection.
Component Findings
For each major component (rotor, blades, bearings, casing), record defects, observations, and supporting photos.
Overall Assessment
Provide an overall condition rating, summary of findings, and recommended actions.
Abbreviations and Symbols
List abbreviations and acronyms used in the report for clarity.
Inspection Participants
Record the names and roles of all personnel involved in the inspection.
Signatures
Capture signatures of the turbine engineer and plant manager to approve the report.
Document Fields and Columns
General Information
- Inspection date
- Date when the inspection was performed.
- Address
- Location of the plant where the steam turbine is installed.
- Basis for inspection
- Type of inspection (e.g., bearing inspection, major overhaul).
- Expert
- Name of the turbine engineer.
Object of Inspection
- Object name
- Turbine identification (e.g., LP Turbine).
- Technical condition
- Overall condition rating of the turbine.
Component Findings
- No.
- Sequential number of the finding.
- Element
- Component (e.g., rotor, blade, bearing, casing).
- Defect
- Type of defect or observation.
- Damage description
- Detailed description of the finding.
- Photos
- Photographs documenting the finding.
Inspection Participants
- No.
- Sequential number of the participant.
- Full name
- Full name of the participant.
- Position / status
- Role or title (e.g., turbine engineer, plant manager).
- Comment
- Additional notes about the participant.
Frequently Asked Questions about Photo Reports and Photo Tables
What components are inspected?
The report covers rotor, blades, bearings, and casing. Each component has dedicated sections for condition, defects, observations, and photos.
What performance measurements are recorded?
The report records vibration levels, bearing temperatures, steam conditions (pressure and temperature), and turbine speed.
What defects are commonly found?
Common defects include corrosion, cracking, blade erosion, bearing wear, rotor imbalance, and overheating. The report includes a predefined list of defects.
Is photo evidence required?
Yes, photo evidence is required for rotor, blades, and bearings. Casing photos are optional.
Who signs the report?
The report includes signature fields for the turbine engineer and plant manager. A mechanical technician can be listed as an additional participant.
Create Your Document Online
Enter inspection details and generate a ready-to-download document.