Mobile Photo Documentation App
The mobile photo documentation app allows you to take and organize photos directly on site, making it easy to attach visual evidence to your inspection report.
Mobile AppReport
Gas Turbine Inspection Report
Create a professional gas turbine inspection report online. Record findings from compressor, combustor, and turbine section inspections, attach photo evidence, and obtain signatures.
Start with this template
The full inspection cycle — in one service
Take photos of the object in the mobile app, complete the inspection report from the template, and download the finished photo report as Word or PDF.
Inspection report
Complete the document from this template: sections, fields, photo documentation, and signatures.
Photo Report Generator
Use the photo report generator to add structured photo evidence to your gas turbine inspection report. Capture images of blades, liners, and defects with automatic captions.
Create Photo ReportReport
Document Preview
Review the structure, sections, and fields before proceeding to fill out the document.
Gas Turbine Inspection Report
No.GT-2026-005
1. General Information
The general information about the inspection, including the purpose, scope, and legal basis, is provided below.
| Inspection date | 7/14/2026 | Address | Unit 1, Green Valley CCGT, 2000 Energy Dr, Austin, TX 78701 |
| Basis for inspection | Combustion inspection after 8000 hours |
Expert Daniel Garcia , Gas Turbine Engineer
The inspection was conducted in accordance with the applicable regulations and standards.
2. Object of Inspection
The inspected object is a thermal power plant, including its main equipment and auxiliary systems.
| Object name | GT-1 | Technical condition | not filled in |
| Operating Hours, hours | 25000 |
The object was identified and its key characteristics are recorded.
3. Turbine Parameters
The main parameters of the thermal power plant were measured and compared with the design values.
| Exhaust Gas Temperature | 540 | Compressor Discharge Pressure | 12.5 |
| Fuel Consumption | 8500 |
The main parameters are within the permissible ranges specified in the design documentation.
4. Inspection Conditions
The operating conditions of the plant, including load, temperature, and pressure, were monitored during the inspection.
Inspection conditions are not selected.
The operating conditions were stable and within the specified limits.
5. Component Findings
For each major component (compressor, combustor, turbine section, bearings), record defects, observations, and supporting photos.
| No. | Damage description | Photos |
|---|---|---|
| 1 | - | not filled in |
| 2 | - | not filled in |
6. Overall Assessment
Provide an overall condition rating, summary of findings, and recommended actions.
| Identification was carried out | Gas Turbine GT-1 |
| There are remarks | Combustor liners show cracking. Compressor fouling present. Overall condition fair. |
7. Abbreviations and Symbols
List abbreviations and acronyms used in the report for clarity.
Symbols and abbreviations are not selected
8. Inspection Participants
Record the names and roles of all personnel involved in the inspection.
| No. | Full name | Position / status | Comment |
|---|---|---|---|
| 1 | Daniel Garcia | Gas Turbine Engineer | Lead inspector |
| 2 | Karen White | Plant Manager | Reviewed findings |
Signatures
Capture signatures of the gas turbine engineer and plant manager to approve the report.
______________________________
Daniel Garcia, Gas Turbine Engineer
______________________________
Daniel Garcia
______________________________
Karen White
Report
Purpose and Procedure for Drafting the Document
What Is a Gas Turbine Inspection Report?
A gas turbine inspection report is a structured document used to record the condition of gas turbine components after a defined number of operating hours. It covers compressor, combustor, turbine section, and bearing inspections, along with performance measurements and an overall assessment.
Who Uses This Report?
Gas turbine engineers, plant managers, and maintenance teams use this report to document inspection results and plan maintenance actions. It is commonly used in power plants, industrial facilities, and oil and gas installations.
Key Sections in the Template
The template includes sections for inspection identification, participants, compressor inspection, combustor inspection, turbine section inspection, bearing inspection, performance measurements, overall assessment, and signatures. Each section contains fields for condition ratings, defects, observations, and photos.
Power Generation Plants
Gas turbine inspection reports are essential for power plants that rely on gas turbines for electricity generation. They help track component wear and schedule overhauls.
Oil and Gas Facilities
In oil and gas operations, gas turbines drive compressors and generators. Regular inspections ensure reliability and prevent unplanned downtime.
Industrial Cogeneration
Cogeneration plants that produce both heat and power use gas turbines. Inspection reports support maintenance planning and regulatory compliance.
Marine Propulsion
Gas turbines used for ship propulsion require periodic inspections. This template can be adapted for marine applications.
- 1
Prepare for Inspection
Ensure the turbine is shut down and cooled. Gather necessary tools, borescope equipment, and the inspection template.
- 2
Inspect Components
Visually inspect compressor blades, combustor liners, turbine blades, and bearings. Record condition, defects, and observations.
- 3
Measure Performance
Record exhaust gas temperature, compressor discharge pressure, vibration levels, and fuel consumption.
- 4
Complete and Sign Report
Summarize findings, provide recommendations, and obtain signatures from the gas turbine engineer and plant manager.
Photo Report Generator
Use the photo report generator to add structured photo evidence to your gas turbine inspection report. Capture images of blades, liners, and defects with automatic captions.
Create Photo ReportMobile Photo Documentation App
The mobile photo documentation app allows you to take and organize photos directly on site, making it easy to attach visual evidence to your inspection report.
Mobile AppDocument Sections
Click a section to jump to it in the sample document.
General Information
The general information about the inspection, including the purpose, scope, and legal basis, is provided below.
Object of Inspection
The inspected object is a thermal power plant, including its main equipment and auxiliary systems.
Turbine Parameters
The main parameters of the thermal power plant were measured and compared with the design values.
Inspection Conditions
The operating conditions of the plant, including load, temperature, and pressure, were monitored during the inspection.
Component Findings
For each major component (compressor, combustor, turbine section, bearings), record defects, observations, and supporting photos.
Overall Assessment
Provide an overall condition rating, summary of findings, and recommended actions.
Abbreviations and Symbols
List abbreviations and acronyms used in the report for clarity.
Inspection Participants
Record the names and roles of all personnel involved in the inspection.
Signatures
Capture signatures of the gas turbine engineer and plant manager to approve the report.
Document Fields and Columns
General Information
- Inspection date
- Date when the inspection was performed.
- Address
- Location of the plant where the gas turbine is installed.
- Basis for inspection
- Type of inspection (e.g., combustion inspection, hot gas path inspection).
- Expert
- Name of the gas turbine engineer.
Object of Inspection
- Object name
- Turbine identification (e.g., GT-1).
- Technical condition
- Overall condition rating of the turbine.
- Operating Hours (hours)
- Total operating hours since last inspection or since new.
Component Findings
- No.
- Sequential number of the finding.
- Element
- Component (e.g., compressor, combustor, turbine section, bearing).
- Defect
- Type of defect or observation.
- Damage description
- Detailed description of the finding.
- Photos
- Photographs documenting the finding.
Inspection Participants
- No.
- Sequential number of the participant.
- Full name
- Full name of the participant.
- Position / status
- Role or title (e.g., gas turbine engineer, plant manager).
- Comment
- Additional notes about the participant.
Frequently Asked Questions about Photo Reports and Photo Tables
What types of gas turbine inspections can this template cover?
This template supports combustion inspections, hot gas path inspections, major overhauls, routine inspections, and emergency inspections. You can select the inspection type from the dropdown menu.
Can I add photos of defects to the report?
Yes, the template includes photo fields for each major component. You can attach close-up photos of defects with scale references to document findings visually.
Who typically signs the gas turbine inspection report?
The report is usually signed by the gas turbine engineer who performed the inspection and the plant manager who reviews and approves the findings.
Is this template suitable for regulatory compliance?
The template helps document inspection results in a structured format, which may support compliance with internal maintenance procedures and industry standards. Exact requirements depend on your organization and applicable regulations.
Can I customize the sections and fields?
Yes, the online template allows you to add, remove, or modify sections and fields to match your specific inspection protocol.
Create Your Document Online
Enter inspection details and generate a ready-to-download document.